Click image to view full size image
Cable chain
Brief Introduction:
Cable chains or drag chains are special chains designed to protect and guide flexible cable or hydraulic and pneumatic hoses connected to moving automated machines and equipment. They reduce wear and stress on cables and hoses, giving a good protection and improve operator safety.
Application:
Cable chains are used anywhere where there is a moving part to be connected to the static part of equipment such as: machine tools, cranes, car wash equipment, medical and laboratory equipment, automatic warehousing, forklifts, industrial robots, and offshore oil rigs.
Structure:
Papageno Cable chain looks like tank chain, consisting of many unit rotating-freely links. Unit link consists of left and right link plate and top and bottom cover plate. Each drag can be easily opened and installed, no need threading, just put the electric cable,oil tube,air pipe,water pipe and others into drag chain after opening the cover plate.
Same series Papageno cable chain are same in inner height, but various in inner width and bending radius.
Due to the differences of top and bottom cover plate, cable chain can be divided into bridge type, enclosed type and half enclosed type. And cable chain can also be divided into one-side open type and two-side open type, according to the different structures.
Features:
1, Material: Reinforced Nylon.
High pressure and the tensile load, good toughness, high elasticity, wear resistance and flame retardant. Resistant to oil, salt and have certain ability of acid and alkali resistance.
2, Operating temperature:-40ºC~120ºC
High and low temperature performance is stable, can be used in outdoor.
3, Running speed and acceleration:top speed of 5 m/s
Specific speed, acceleration depends on the running situation.
4, Operating life: under the condition of normal use overhead, up to 5 million reciprocating motion number
Specific life depending on the operating conditions.
Certificate:
SGS report for cable chain, which comply with RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC.
Information required for a firm quotation of cable drag chains:
1. Inner height and inner width (essential information).
2. Bending radius of the cable chain or working height.
3. Drawing if possible.
4. Quantity.
Below are some suggestions for selection of cable chain:
1.Inner Height and width: Plus at least 10% to the space which the cables,wires or conduits take up.
2.Bending radius: Working height is decided by bending radius. The bending radius is bigger, the working height is higher.
3.Usually closed type for dust proof requirement, open type for crane,forklift and other long distance application.
Packing: in carton.
Brief Introduction:
Cable chains or drag chains are special chains designed to protect and guide flexible cable or hydraulic and pneumatic hoses connected to moving automated machines and equipment. They reduce wear and stress on cables and hoses, giving a good protection and improve operator safety.
Application:
Cable chains are used anywhere where there is a moving part to be connected to the static part of equipment such as: machine tools, cranes, car wash equipment, medical and laboratory equipment, automatic warehousing, forklifts, industrial robots, and offshore oil rigs.
Structure:
Papageno Cable chain looks like tank chain, consisting of many unit rotating-freely links. Unit link consists of left and right link plate and top and bottom cover plate. Each drag can be easily opened and installed, no need threading, just put the electric cable,oil tube,air pipe,water pipe and others into drag chain after opening the cover plate.
Same series Papageno cable chain are same in inner height, but various in inner width and bending radius.
Due to the differences of top and bottom cover plate, cable chain can be divided into bridge type, enclosed type and half enclosed type. And cable chain can also be divided into one-side open type and two-side open type, according to the different structures.
Features:
1, Material: Reinforced Nylon.
High pressure and the tensile load, good toughness, high elasticity, wear resistance and flame retardant. Resistant to oil, salt and have certain ability of acid and alkali resistance.
2, Operating temperature:-40ºC~120ºC
High and low temperature performance is stable, can be used in outdoor.
3, Running speed and acceleration:top speed of 5 m/s
Specific speed, acceleration depends on the running situation.
4, Operating life: under the condition of normal use overhead, up to 5 million reciprocating motion number
Specific life depending on the operating conditions.
Certificate:
SGS report for cable chain, which comply with RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC.
Information required for a firm quotation of cable drag chains:
1. Inner height and inner width (essential information).
2. Bending radius of the cable chain or working height.
3. Drawing if possible.
4. Quantity.
Below are some suggestions for selection of cable chain:
1.Inner Height and width: Plus at least 10% to the space which the cables,wires or conduits take up.
2.Bending radius: Working height is decided by bending radius. The bending radius is bigger, the working height is higher.
3.Usually closed type for dust proof requirement, open type for crane,forklift and other long distance application.
Packing: in carton.